|
8610
FUGA
Easy to use, economical joint filler
High quality grouting material
- For 2-7mm joint widths.
- For wet and dry indoor and outdoor environments.
- For medium absorbent ceramic tiles.
- Moderate abrasion resistance: Ideal for medium traffic areas.
- Efficient: easy to apply and wash off.
Area of application
- Outdoor: floor + wall
- Indoor: floor + wall
Processing method
- For hand processing
- It can be used to fill the joints of outdoor and indoor ceramic, gres, and cement-bonded tile coverings. Ideal for surfaces exposed to moderate loads (e.g. walls, indoor floors) for ceramic tiles.
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The surface must be of sufficient strength, dry, clean, free of dust and dirt and not frozen.
Substrate preparation
Excess adhesive material and other contamination must be removed from the joints. Grouting should only be started after the glue has completely dried.
Preparation of the mixture
Pour the dry mixture into the required amount of water and mix with a mixer at low speed , let it stand for 5 minutes and mix it once more. Use drinking water or water complying with EN 1008 to mix the mixture. Continue mixing until the material is homogeneous and free of lumps.
Water demand
| Quantity | Liters (recommended) |
|---|---|
| 5 kg | 1,5 l |
Mixing
Mixing time
5 min
Mixing speed in Rpm
800x/min
Processing instructions
The mixed grouting material is applied to the joints with a joint puller. As soon as the material in the joints has reached the appropriate strength, the surface is cleaned with a wet sponge. Dry grout on the surface of the tiles is removed with a clean cloth.
Application thickness
| Minimum layer thickness | 2 mm |
|---|---|
| Maximum layer thickness | 7 mm |
Consumption
Material consumption min.
0.5
Material consumption max.
1
Material consumption in measuring unit
kg/m²
Working time (potlife)
30 min
Walkability after
24 h
Treatment after application
Solidified, grouted surfaces can only be cleaned with clean water in the first weeks.
Technical parameters
| Main binder | White cement |
| Max. grain size | 0,3mm |
| Full load after | 7 d |
| Compressive strength 28 days in N/mm² | 14 N/mm² |
| Density in Kg/m³ | 1600 |
Files
|
|